LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Turbo >> Repair and Diagnosis >> Suspension >> Front Suspension >> 40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne >> WM 405019 Removing And Installing Front Wheel Bearing Housing (Wheel Carrier) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary Work >> Preliminary Work For Removing And Installing Front Wheel Bearing Housing (Wheel Carrier)

Preliminary Work For Removing And Installing Front Wheel Bearing Housing (Wheel Carrier)

  1. Remove hub cap using puller hook 9229  and loosen drive shaft mounting at the wheel side before raising the vehicle. Operate the brake while doing so (second mechanic required). → 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT 
    Fig 1: Identifying Lock Nut On Drive Shaft
    G09935179Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove wheel. → 440519 REMOVING AND INSTALLING WHEEL
scientia non olet · About LEMON Manuals