LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Turbo >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> 43 - Leveling System, Air Suspension, Damper Control (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 432519 Removing And Installing Rear Spring Strut (Air Springs) >> Preliminary Work

Preliminary Work

  1. Remove the relevant side panel of the luggage compartment cover.

    > WM 700619 REMOVING AND INSTALLING TRIM PANEL FOR LUGGAGE COMPARTMENT (LUGGAGE COMPARTMENT COVER) AT THE LOCK SUPPORT (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0)) - section on "Removing"

  2. Remove wheel

    > 440519 Removing and installing wheel - section on  "REMOVING "

  3. Bleed the spring strut.

    To bleed the levelling system (compressed air must be released from the system), use the Porsche System Tester. To do this, select the Bleed levelling system menu item in the levelling system.

    > 4301IN BLEEDING AND FILLING THE LEVELLING SYSTEM 

scientia non olet · About LEMON Manuals