Installing Power-Steering Cooler

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Position the cooler -E- and guide it into the holder -3- from the left -D- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Clipping in cooler
Clip in the cooler at the two holders -2- (-C- ).
Secure hydraulic lines to the power-steering cooler.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing hydraulic lines
1. 3.1 Position hose holder -B- and tighten the fastening screw.
2. 3.2 Connect both hoses -A- .
3. 3.3 Tighten clamps.
Install centre air guide -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing centre air guide