LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (48 - Steering (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 482919 Removing And Installing Switch For Height And Fore-And-Aft Adjustment >> Removing Switch For Height And Fore-And-Aft Adjustment

Removing Switch For Height And Fore-And-Aft Adjustment

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The switch for height and fore-and-aft adjustment is located on the bottom of the steering column casing.

  1. Insert a suitable flat screwdriver into the slit -1-  .
    G16330698Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inserting screwdriver

  2. Press the clip back using the flat screwdriver.
  3. Pull the switch -2-  down out of the way.
  4. Unplug electric plug connection -1-  .
G16330699Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pulling off connector