LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (48 - Steering (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 481319 Removing And Installing Steering Column Casing >> Removing Steering Column Casing

Removing Steering Column Casing

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust steering wheel to lower position.
  2. Unclip upper part of casing.
    G16330672Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping upper part

    1. 2.1 Turn steering wheel in such a way that the openings on the front are accessible.
    2. 2.2 Unclip upper part of casing -1-  through the openings on the front -2-  using a suitable screwdriver.
  3. Fold upper part of steering column casing -1-  up and unclip the clips on the dust boot -2-  .
    G16330673Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping dust boot

  4. Remove upper part of steering column casing -1-  .
  5. Release lower part of casing.
    G16330674Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws on lower part

    1. 5.1 Unscrew fastening screws -3-  on lower part of casing -1-  . (For electric steering-wheel adjustment only)  .
    2. 5.2 Turn the steering wheel in such a way that the fastening screws -2-  on the front are accessible.
    3. 5.3 Unscrew fastening screws -2-  on lower part of casing -1-  .
  6. Release and pull off plug connection. (For electric steering-wheel adjustment only)  .
  7. Remove lower part of steering column casing -1-  .
scientia non olet · About LEMON Manuals