Required Tools And Parts
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Parts Info:
An auxiliary tool in the form of a screw (M14 x 1.5) and a nut (M14 x 1.5) is required for removing and installing the pulsation damper.
The following parts, for example, can be used for this (these may already be available at the Porsche dealer).
| Part No. | Designation |
|---|---|
| PAF105556 | Cheese head bolt with multiple-tooth head (M14 x 1.5) |
| 5B4423895 | Twist lock (M14 x 1.5) |
Tools:
- Torque wrench, 6-50 Nm (4.5-37 ftlb.), e.g. > V.A.G 1331A - Torque wrench, 6-50 Nm (4.5-37 ftlb. )
- Suitable open-ended wrench (commercially available)
- Suitable support clamp (commercially available)
- Felt-tipped pen (commercially available)