Installing Actuator For Electric Parking Brake
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Insert actuator for electric parking brake -1-
and tighten two fastening screws -2-
.
> Tightening torque 2 (1.5 ftlb.) Nm
Removing actuator for electric parking brake
- Carry out a function test.
- The indicator light in the parking brake actuator must be ON when you close it.
- The indicator light in the parking brake actuator must be OFF when you open it.
- Check for locking and release noises from the electric parking brake actuators when you actuate them.