LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (42 - Rear Wheel Suspension Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 429019 Removing And Installing Anti-Roll Bar >> Removing Anti-Roll Bar

Removing Anti-Roll Bar

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The pictures shown in this document may differ from the original.

  1. Remove connecting link at the left and right of the anti-roll bar.
  2. Remove four fastening screws on the anti-roll bar and take off the clamps.
  3. Carefully pull out the anti-roll bar.
scientia non olet · About LEMON Manuals