Tools And Materials: Tools
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Tool overview for chassis subframe bearings > T10301 - assembly fixture
Tool overview for chassis subframe bearings
| A | > VAS 6178 - Hydraulic cylinder together with > VAS 6179 - Foot Pump. |
| B | > VAS 6179/1 - Pressure Gauge with Connection Line |
| 1 | Threaded rod (Inserted into the tubular piston cylinder -A- .) |
| 2 | Threaded nut (Screwed onto the threaded rod -1- .) |
| 3 | Pipe (For pressing out the chassis subframe bearings.) |
| 4 | Ring (For pressing out the chassis subframe bearings.) |
| 5 | Press-out plate (For pressing out the chassis subframe bearings.) |
| 6 | Thrust piece (For pressing in the chassis subframe bearings.) |
| 7 | Press-in plate (For pressing in the chassis subframe bearings.) |
| 8 | Ring (For pressing out the chassis subframe bearings.) |
| 9 | Spacer sleeve (For pressing out the chassis subframe bearings together with pipe -3- .) |
| 10 | Thrust piece (For pressing in the chassis subframe bearings.) |
| 11 | Spacer sleeve (For pressing in the chassis subframe bearings.) |
> T10301/20 - Porsche supplement set
Assembly fixture T10301/20
| 2 | Threaded nut (Screwed onto the threaded rod -1- .) |
| 12 | Press-out ring (For pressing out the chassis subframe bearings.) |
| 13 | Pressure piece (For pressing in the chassis subframe bearings.) |
| 14 | Bush (For pressing out the chassis subframe bearings.) |