LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (42 - Rear Wheel Suspension Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 420119 Removing And Installing Rear Axle >> Preliminary Work For Removing And Installing Rear Axle >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. On vehicles with levelling system: Switch off levelling system.

    > WM, 4X00IN LIFTING THE VEHICLE

  2. Raise the vehicle.

    > WM, 4X00IN LIFTING THE VEHICLE

  3. Remove rear wheels

    > 440519 Removing and installing wheel - section on "REMOVING ".

  4. Remove the exhaust system.

    > 260119 Removing and installing exhaust system - section on "REMOVING "