High-Pressure Pump On Turbo Engine, 6-Piston Pump
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: High-Pressure Pump Components Location With Torque Specifcation - Turbo Engine, 6-Piston Pump
High-pressure pump on turbo engine, 6-piston pump
TIGHTENING TORQUE SPECIFICATIONS
| 1 | High-pressure pump |
| 2 | High-pressure line: (3 turns: tighten, loosen, tighten) > Tightening torque 25 (19 ftlb.) Nm -- dang -- |
| 3 | Low-pressure line: (3 turns: tighten, loosen, tighten) > Tightening torque 25 (19 ftlb.) Nm -- dang -- |
| 4 | Screw socket. M8 > Tightening torque 23 (7 ftlb.) Nm -- dang -- |
| 5 | Screw socket. M6 > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- |
| 6 | Protective plate |
| 7 | Screw. M6 x 20 > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- |
| 8 | Screw. M6 x 25 > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- |
| A | Required line distance (5 to 8 mm) between high-pressure line and low-pressure line Temperature sensor; not shown, to low-pressure line > Tightening torque 20 (15 ftlb.) Nm -- dang -- |