Sensor Wheel Adaptation
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Necessary after:
- Re-programming DME control unit
- Replacing DME control unit
How?
Drive with engine overrun:
- Preconditions:
- 1.1 Engine at operating temperature
- Accelerate to 3, 000 rpm three times in quick succession in 2nd gear and allow vehicle to roll with gear engaged (engine overrun)
- Switch off ignition. (see also Information)