Installing Cooling Fan Housing (Radiator Frame)
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Electrically moved components
- Danger of limbs being trapped or severed
→ Switch off electric power to drive motor.
→ Make sure it does not switch on again.
→ Check that there is no electric charge.
- Carefully press the cooling water hose aside and slide the cooling fan housing carefully into the engine compartment along the radiator from top to bottom.
- Check that the cooling fan housing is installed correctly. To do this, check that the locking springs on the left and right have engaged properly and that the three fastening lugs on the underside have engaged in the plastic clips.
- Plug in electric plug connection -8-
at the cooling water hose until it engages securely.
Plugging in connector on cooling water hose
- Plug in electric plug connection -6-
for fan on the cooling fan housing and lock it -a-
.
Plugging in connector on cooling fan housing
- Clip electric lines into the brackets.