Component Overview
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Oil lines, intake manifold on turbo engine
| 1 | Mount for oil extraction line for turbocharger, cylinders 1 to 4 |
| 2 | Mount for oil extraction line for turbocharger, cylinders 5 to 8 |
| 3 | Mount for oil separator vent line, cylinders 5 to 8 |
| 4 | Mount for oil pump intake manifold |
| 6 | Mount for oil pressure pipe |
| 9 | Mount for oil regulating line |
| A | Direction of travel |
Oil lines, intake manifold on naturally aspirated engine
| 1 | Mount for oil pump intake manifold |
| 2 | Mount for oil separator vent line, cylinders 5 to 8 |
| 3 | Mount for oil pressure pipe |
| 4 | Mount for oil regulating line |
Oil pump on turbo engine with oil extraction stage
| 1 | Oil pump with extraction stage |
| 2 | Screw, M8 x 22; replace |
| 3 | Oil pump sprocket |
| 4 | Cap screw, M36 x 1.5 x 12 |
| 5 | Solenoid valve |
| 6 | O-ring (grease before fitting) |
| 7 | Dowel sleeve |
| 8 | Screw, M6 x 45 |
| 9 | Sprocket cover |
| 10 | Screw, M6 x 16 |
| 11 | Drive chain |
| 12 | Connection for intake manifold joining socket |
| A | Direction of travel |
Oil pump on naturally aspirated engine
| 1 | Oil pump |
| 2 | Screw, M8 x 22; replace |
| 3 | Oil pump sprocket |
| 4 | Cap screw, M36 x 1.5 x 12 |
| 5 | Solenoid valve |
| 6 | O-ring (grease before fitting) |
| 7 | Dowel sleeve |
| 8 | Screw, M6 x 45 |
| 9 | Sprocket cover |
| 10 | Screw, M6 x 16 |
| 11 | Drive chain |