LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (13 - Engine - Crank Drive, Pistons (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 134819 Removing And Installing Crankshaft >> Information >> Component Overview

Component Overview

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Components Location
G16308349Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Crankshaft

1  Crankshaft
2  Straight pin, 6 x 20
3  Spring, 5 x 6.5
4  Thrust washer (grooves facing out)
5  Main bearing shell, upper
6  Main bearing shell, lower
7  Shaft sealing ring => Do not touch sealing ring lip! Clean crankshaft flange and oil lightly
8  View of crankshaft flange
9  Crankshaft bearing classification (four types) G  Yellow; B  Blue, R  Red; N  Green => (example: GGGGG-BBBB; 5 main shaft bearings with yellow marking, 4 double (8) connecting rod bearings with blue marking) => For numbering, see A  .
A  Direction of travel (main bearing 1 is the first in direction of travel against output)