LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Turbo >> Repair and Diagnosis >> Collision >> Body Panels >> 55 - Lids, Flaps -- 92A Cayenne >> WM 555719 Removing And Installing Release For Rear Lid (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Release For Rear Lid

Removing Release For Rear Lid

NOTE: Voltage peaks
  • Risk of damage to load or to the control unit

→ Switch off ignition and remove remote control before disconnecting or removing load.

  1. Screw off fastening nuts -1-  for release for rear lid -A-  .
    Fig 1: Removing Release For Rear Lid
    G09939293Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unplug electric plug connection -B-  .
  3. Press rear lid release at the pins -1-  outwards -A-  .

    Removing rear lid release 

scientia non olet · About LEMON Manuals