Removing Sunroof Motor

NOTE: Voltage peaks

Risk of damage to load or to the control unit

→ Remove the ignition key and switch off load before disconnecting or removing load.

Information

Always comply with the regulations for handling ESD-sensitive components!

Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche.
The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed.
Never touch the electric pins and plug contacts.

Fig 1: Identifying Sunroof Motor Installation Position
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pull lock for electric plug connection -2- off the sunroof motor -A- .

Fig 2: Pulling Lock For Electric Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release electric plug connection -2- for sunroof motor -a- and pull it off -B- .
Unscrew three fastening screws -3- on the sunroof motor -1- .

Fig 3: Identifying Sunroof Motor And Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.