LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne S >> Repair and Diagnosis >> Suspension >> Front Suspension >> 40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne >> WM 400619 Removing And Installing Front-Axle Carrier (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Tools And Materials

Tools And Materials

Fig 1: Identifying Lifting Platform
G09935018Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. -A-  - Assembly mandrel  => Height can be adjusted; used for mounting in the engine carrier; equipped with a locking screw to prevent engine from tipping and to adjust the height. Item 2 in base carrier 
  2. -B-  - Wheel hub holder  => Secures the spring struts to prevent them from tipping. Inserted from the side into the second cross member from the front 
  3. -C-  - Assembly mandrel  => Height can be adjusted; used for mounting in the front-axle carrier at the front; equipped with a locking screw to prevent engine from tipping and to adjust the height. Item 1 in base carrier 
  4. -D-  - Support  => Not used here.
  5. -E-  - Wishbone support  => Used in conjunction with -B-  to protect the wheel suspension and spring struts from damage.
  6. -F-  - Assembly mandrel  => For mounting on the front-axle carrier at the rear. Item 3 in base carrier 
  7. -G-  - Assembly mandrel  => Guide for positioning the lifting platform into the body; first moves into a bore in the body for centering roughly. Item 4 in base carrier 
  8. -H-  - Assembly mandrel  => For mounting on the transmission cross member. Item 5 on base carrier 
Fig 2: Overview Of Tools
G09935019Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. -A-  - Support  => Prevents the engine from tipping backwards. Not generally used.
  2. -B-  - Wheel hub holder  => Secures the spring struts to prevent them from tipping.
  3. -1/11-  - Front front-axle carrier mounting  => Height can be adjusted; used for mounting in the front-axle carrier at the front; equipped with a locking screw to prevent engine from tipping and to adjust the height. Position 1 in the base carrier 
  4. -1a-  - Mounting point with height adjustment  => Screwed into part 1/11.
  5. -2-  - Lateral mounting mandrel for engine carrier  => Height can be adjusted; used for mounting in the engine carrier; equipped with a locking screw to prevent engine from tipping and to adjust the height. Item 2 in base carrier 
  6. -2a-  - Mounting point with height adjustment  => Screwed into part 2.
  7. -2b-  - Protection against tipping  => Screwed into Part 2a. Prevents the engine from tipping forward.
  8. -3-  - Rear front-axle carrier mounting  => Position 3 in the base carrier 
  9. -4-  - Mount in the body  => Position 4 in the base carrier 
  10. -5-  - Mount for transmission cross member  => Position 5 in the base carrier 
Fig 3: Identifying Complete Structure Of Base Carrier With Mounting Mandrels
G09935020Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. A, 22 and 11  - Not used for removing the engine!!
  2. 1  - Screw in mounting mandrel for front-axle carrier at the front (instead of "11")
scientia non olet · About LEMON Manuals