Additional Coolant Pump

Location	Description	Type	Basic value
Additional coolant pump with holder to timing-case cover		Tightening torque	10 Nm (7.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Removing and installing coolant run-on pump
Additional coolant pump holder to additional coolant pump	3.5x20	Tightening torque	1.5 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Additional coolant pump holder
Fastening screws securing holder to additional coolant pump	M6x 12	Tightening torque	10 Nm
Fastening nut for cable holder	M6	Tightening torque	10 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Securing additional coolant pump
Fastening screws for engine wire harness holder	M6x 12	Tightening torque	10 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Securing engine wire harness