LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Diesel >> Repair and Diagnosis >> Steering >> Power Steering >> 48 - Steering -- 92A Cayenne >> WM 481319 Removing And Installing Steering Column Casing (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Steering Column Casing

Removing Steering Column Casing

  1. Adjust steering wheel to lower position.
  2. Unclip upper part of casing.
    Fig 1: Removing Upper Part
    G09937670Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Turn steering wheel in such a way that the openings on the front are accessible.
    2. 2.2. Unclip upper part of casing -1-  through the openings on the front -2-  using a suitable screwdriver.
  3. Fold upper part of steering column casing -1-  up and unclip the clips on the dust boot -2-  .
    Fig 2: Removing Dust Boot
    G09937671Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Remove upper part of steering column casing -1-  .
  5. Release lower part of casing.
    Fig 3: Identifying Steering Column Lower Part Screws
    G09937672Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 5.1. Unscrew fastening screws -3-  on lower part of casing -1-  . (For electric steering-wheel adjustment only)  .
    2. 5.2. Turn the steering wheel in such a way that the fastening screws -2-  on the front are accessible.
    3. 5.3. Unscrew fastening screws -2-  on lower part of casing -1-  .
  6. Release and pull off plug connection. (For electric steering-wheel adjustment only)  .
  7. Remove lower part of steering column casing -1-  .
scientia non olet · About LEMON Manuals