LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayenne Diesel >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 - Exterior Equipment -- 92A Cayenne >> WM 663119 Removing And Installing Door Entry Guard (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Door Entry Guard

Installing Door Entry Guard

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening nuts securing door entry guard to body.
    1. 2.1. Tightening a fastening nut in the area of the front wing strut with Tightening torque 4 Nm 
    2. 2.2. Tighten nine fastening nuts, front, middle and rear with Tightening torque 6 Nm 
      Fig 1: Removing Nuts For Sill Cover
      G09940203Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals