Installing Front Wheel Cover

Information 

• The object and room temperature must be at least 18° C for bonding the components. 
• The components must be bonded for at least 24 hours before washing the vehicle. 

1. Fit wheel cover on front apron.
   1. 1.1. Position wheel cover -7-  on the front apron -2-  and clip it in.
   Fig 1: Fitting Wheel Cover On Front Apron
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   2. 1.2. Pull protective paper -9-  off the adhesive tape.
   3. 1.3. Press evenly and firmly on wheel cover in area of adhesive -7-  with the ball of your hand.
   Fig 2: Pulling Off Protective Paper

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Fit wheel cover on wing.
   1. 2.1. Position wheel cover -6-  on the wing -5-  and clip it in.
      Fig 3: Fitting Wheel Cover On Wing

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   2. 2.2. Pull protective paper -8-  off the adhesive tape.
      Fig 4: Pulling Off Protective Paper

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   3. 2.3. Press evenly and firmly on wheel cover in area of adhesive -6-  with the ball of your hand.
3. Screw in fastening screws -1-  at the front of the front apron -2-  .
   Fig 5: Securing Screws Of Wheel Cover To Front Apron

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Screw in fastening screws -4-  on the wing -5-  .
   Fig 6: Removing Screws Of Wheel Cover To Wing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Fit safety clip -3-  .
   Fig 7: Fitting Safety Clip

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Secure front wheel housing liner at the wheel arch.
   1. 6.1. Screw in fastening screws along the wheel arch -1-  .
      Fig 8: Securing Wheel Housing Liner

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.