Installing Cover For Spray Nozzle

Information 

If the cover of the spray nozzle has to be replaced, the new part must be painted the same colour as the front apron.

1. Engage cap on nozzle head.
   1. 1.1. Pull nozzle head -1-  out of the front apron -A-  and hold it.
   2. 1.2. Engage cap -2-  at the latches on the nozzle head -1-  (-B-  ).
      Fig 1: Engaging Cap On Nozzle Head

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Slide nozzle head and cover into the locking teeth on the spray nozzle.
3. Release spray nozzle and check the gap to ensure that the spray nozzle cover is positioned evenly all the way round.