Subsequent Work

Fit wheel. Use assembly aids (Assembly Pins) -1- . → 440519 REMOVING AND INSTALLING WHEEL .

Fig 1: Identifying Assembly Aids (Assembly Pins)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

When replacing the brake discs and/or brake shoes, the brake shoes for the electronic parking brake (EPB) must be ground down. The routine is initiated using the Porsche System Tester. → 468350 REWORKING PARKING-BRAKE SHOES

It is not necessary to grind down the brake discs if you are simply removing/installing the brake discs.
- Set the brake discs to the basic setting if necessary and calibrate the system . → WM 468316 ADJUSTING AND CALIBRATING BRAKE SHOES
Connect and start the Porsche System Tester. Follow the instructions on the Porsche System Tester.
1. 2.1. Adjust parking-brake shoes. → 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES
2. 2.2. Rework parking-brake shoes.
  → 468350 REWORKING (GRINDING) PARKING-BRAKE SHOES
3. 2.3. Adjust and calibrate the parking-brake shoes.
  → 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES