LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seats - 911 CARRERA (996)) >> Removing and installing cushion carrier - as of MY 1996 >> Removing front cushion carrier

Removing front cushion carrier

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Front Cushion Carrier (As Of MY 1996)
G03106130Courtesy of PORSCHE OF NORTH AMERICA, INC.
FRONT CUSHION CARRIER REMOVING PROCEDURE (AS OF MY 1996)

No. Procedure Instructions
1 Removing control module and cover Lift both holders of the cover -1-direction of arrow A-2-9-  . See Fig 1 .
2 Removing switch for seat adjustment Unscrew fastening screw -4-5-arrow-direction of arrow-  . See Fig 1 .
3 Disconnecting wiring harness Disconnect electrical plug connection of the seat heating, unclip the lines from the metal clips -6-  . See Fig 1 .
3a Removing wiring harness Remove wiring harness -7-arrow-  . See Fig 1 .
4 Removing seat cushion from seat frame. Insert the retainer -8-9-9-  . See Fig 1 .
scientia non olet · About LEMON Manuals