LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 614019 Removing And Installing Motor For Rear Side Section Flaps (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing Motor For Rear Side Section Flaps

Removing Motor For Rear Side Section Flaps

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove right cap -1-  .
    Fig 1: Loosening Convertible Top Compartment Trim
    G09994525Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unhook convertible top compartment trim -2-  from locking lug -3-  and lift with care.
  3. Unscrew fastening screw -2-  and carefully pull up casing for rear side section flaps -1-  .
    Fig 2: Identifying Rear Side Section Flaps And Screw
    G09994526Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Release and pull off electric plug connection -1-  on flap -3-  motor.
    Fig 3: Identifying Flap Motor
    G09994527Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Loosen and remove flap motor.
    1. 5.1. Undo fastening screws -2-  .
    2. 5.2. Carefully lever off flap motor -3-  using a suitable tool.