LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 613919 Removing And Installing Seal For Convertible-Top Tip (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing Seal For Convertible-Top Tip

Removing Seal For Convertible-Top Tip

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

  1. Pull the seal -1-  sideways out of the guide.
    Fig 2: Pulling Off Seal
    G09994513Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Loosen fastening screws -3-  .
    Fig 3: Identifying Front Retaining Strip
    G09994514Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove retaining strip -2-  and seal -1-  .
  4. Remove rubber stop -4-  .
    Fig 4: Removing Rubber Stop
    G09994515Courtesy of PORSCHE CARS NORTH AMERICA, INC.