LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 612819 Removing And Installing Convertible Top Covering (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove side convertible top rooflining. → WM 610919 REMOVING AND INSTALLING SIDE CONVERTIBLE TOP ROOFLINING .
  2. Remove seal for convertible-top tip. → 613919 REMOVING AND INSTALLING SEAL FOR CONVERTIBLE-TOP TIP .
  3. Remove rear seal → 612319 REMOVING AND INSTALLING REAR SEAL .
  4. Disconnect wire harness for convertible top in the rear window area. → 975519 REMOVING AND INSTALLING WIRE HARNESS FOR CONVERTIBLE TOP .
  5. Remove front retaining strip. → 614519 REMOVING AND INSTALLING RUBBER SEAL WITH RAIL (FRONT) .
  6. Remove lower side retaining strip. → 614519 REMOVING AND INSTALLING RUBBER SEAL WITH RAIL (LOWER SIDE) .
scientia non olet · About LEMON Manuals