LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 612319 Removing And Installing Rear Seal (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, TARGA 4, TARGA 4S, TARGA 4 GTS, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing Rear Seal

Removing Rear Seal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Actuate rear lid release.
  2. Position convertible-top compartment lid -1-  so that the rear seal -2-  can be reached all the way around.
  3. Pull off seal -2-  all around -arrows A-  the sheet metal flange -3-  .
  4. Pull off seal -2-  to the rear -arrow B-  and guide it off the Targa bar.
    Fig 1: Removing Rear Seal
    G09994470Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals