LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 612319 Removing And Installing Rear Seal (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing Rear Seal

Removing Rear Seal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Seal
G09994467Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Drill out rivets -2-  .
    Fig 2: Drilling Out Rivets
    G09994468Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unhook the seal -1-  from the guide.
    Fig 3: Pulling Off Seal
    G09994469Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove seal.
scientia non olet · About LEMON Manuals