LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 610919 Removing And Installing Rear Convertible Top ROOFLINING (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing And Installing Rear Convertible Top Rooflining >> Removing Rear Convertible Top Rooflining

Removing Rear Convertible Top Rooflining

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Convertible Top Rooflining
G09994413Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unclip convertible top rooflining -1-  now.
    Fig 2: Removing Convertible Top Rooflining
    G09994414Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    Use a suitable tool as an aid for unclipping the component at the marked areas.

    1. 1.1. Unclip convertible top rooflining -1-  now.
      1. 1.1.1. Press the locking lugs of the clips -2-  on the back of the surface roof strut together. -arrows B- 

        Release the clip by pressing on it with a socket wrench (a/f 6) -3-  . -arrow C- 

  2. Check fastening points for signs of damage.
  3. Replace damaged clips.
scientia non olet · About LEMON Manuals