LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 610919 Removing And Installing Front Convertible Top ROOFLINING (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing Front Convertible Top Rooflining

Removing Front Convertible Top Rooflining

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Convertible Top Rooflining
G09994408Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unclip -1-  convertible top rooflining
    Fig 2: Removing Front Convertible Top Rooflining
    G09994409Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    Use a suitable tool as an aid for unclipping the component at the marked areas.

    1. 1.1. Detach convertible top rooflining -1-  from the roof frame using an assembly wedge -2-  .
  2. Remove convertible top rooflining -1-  by pulling it forward.
  3. Check fastening points for signs of damage
  4. Replace damaged clips
scientia non olet · About LEMON Manuals