Removing Center Convertible Top Rooflining

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Center Convertible Top Rooflining

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclip convertible top rooflining -1- now.

Fig 2: Removing Convertible Top Rooflining
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 1.1. Detach convertible top rooflining -1- from the surface roof strut at the Velcro fastener using an assembly wedge -2- .
  Information
  
  Use a suitable tool as an aid for unclipping the component at the marked areas.
2. 1.2. Unclip convertible top rooflining -1- now.
  1. 1.2.1. Detach Velcro strip on the top of the surface roof strut (convertible top joint).
  2. 1.2.2. Press the locking lugs of the clips -3- on the back of the surface roof strut together. -arrows B-
    Release the clip by pressing on it with a socket wrench (a/f 6) -4- . -arrow C-
Check fastening points for signs of damage.
Replace damaged clips.