LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 610119 Removing And Installing Convertible Top (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw for rear side window   Tightening torque 9.7 Nm    
G09994378

Removing rear side window 
Fastening screw for hydraulic cylinder   Tightening torque 9.7 Nm (7.5 ftlb.)    
G09994379

Pulling off safety clips 
Fastening screw on convertible top support   Tightening torque 23 Nm (17 ftlb.)    
G09994380

Loosening convertible top support 
scientia non olet · About LEMON Manuals