Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic Value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening Screws For Rear Apron, Bottom | Tightening Torque | 3.2 Nm (2 ft. lbs.) | +/-0.6 Nm (+/- 0.5 ft. lbs.) | ||
|
Loosening Rear Apron At The Sides |
|||||
| Fastening Screws For Rear Apron, Top | Tightening Torque | 3.2 Nm (2 ft. lbs.) | +/-0.6 Nm (+/- 0.5 ft. lbs.) | ||
|
Removing Spoiler (Tail Light) Cover |
|||||
| Fastening Screw | Item 3 | Tightening Torque | 7 Nm (5 ft. lbs.) | +/-0.7 Nm (+/- 0.5 ft. lbs.) | |
|
Unscrewing Screw |
|||||