LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (13 - Engine - CRANKGEAR, Pistons -- 911 CARRERA (991)) >> WM 137719 Removing And Installing Console With Deflection Roller (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo S, CARRERA 4 "Edition", Turbo CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition") >> Removing Console >> Console With Deflection Roller

Console With Deflection Roller

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Console with deflection roller: 

Fig 1: Overview Of Console Parts
G09990631Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Deflection roller console
  2. Deflection roller
  3. External Torx screws on unit carrier (M8)
  4. External Torx screw on crankcase (M6)
  1. Remove -1-  console.
    1. 1.1. Unscrew three fastening screws -2 and 3-  .
    2. 1.2. Remove console.
      3. Fig 2: Locating Deflection Roller Console And Fasteners
      G09990632Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals