Preliminary Work
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Remove front wheel bearing housing (wheel carrier).
Before lifting the vehicle, loosen the wheel side central nut from the tension bolt/the drive shaft (required to remove the wheel bearing).
- Remove accessories from wheel bearing housing (brake disc, brake cover plate, speed sensor, cable retainer).
Remove central tension bolts in the case of rear-wheel-drive vehicles.