LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 606119 Removing And Installing Fabric Lining (911 TARGA 4, 911 TARGA 4S) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Carry out subsequent work on rear right fabric lining.
    1. 1.1. Install front right fabric lining. → Installing Fabric Lining 
  2. Carry out subsequent work on rear left fabric lining.
    1. 2.1. Install roof assembly. → Installing Roof Assembly 
    2. 2.2. Install front left fabric lining. → Installing Fabric Lining 
  3. Carry out subsequent work on front fabric lining.
    1. 3.1. Install trim panel for sliding/lifting roof. → INSTALLING TRIM PANEL FOR SLIDING/LIFTING ROOF