LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 601219 Removing And Installing Switch For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2) >> Installing Switch For Sliding Roof >> Notes

Installing Switch For Sliding Roof: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press switch for sliding roof into the cover of the motor for sliding roof until the four locking tabs -arrows-  are felt to engage.
    Fig 1: Installing Switch (Sliding Roof)
    G09824484Courtesy of PORSCHE CARS NORTH AMERICA, INC.