Installing Front Direction Indicator Light
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Fit direction indicator light into the front apron from the front and route the wire harness over the fog light.
- Push direction indicator light in the front apron to the inside -B-
and press it onto the front apron at the outside -A-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Information
There must be a Velcro fastener on the front apron, behind the front indicator light.
This Velcro fastener increases the contact force of the direction indicator light. If this Velcro fastener is not fitted or is damaged, it must be fitted/replaced.
In the Service Information, the reference "also use if necessary" is added for the front direction indicator light.
- Secure direction indicator light with the fastening screw -1- .
- Connect the plug connection for the direction indicator light over the fog light until the connector engages securely. Engage plug connection in the mounting point above the fog light.