Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil separator to bracket for oil/water heat exchanger | External Torx screw, M6 x 20 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Cable duct to intake-air distributor | External Torx screw (E10) | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Engine mounting | Special nut, M12 (internal Torx T55) | Tightening torque | 85 Nm (63 ft. lb.) |