LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (10 - Engine - Crankcase, Suspension -- CARRERA (997)) >> WM 105519 Removing And Installing Oil Separator (2010-3) Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO & Gt3) >> Component Information

Component Information

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Oil Separator
G09816151Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Oil separator
  2. Bracket for oil/water heat exchanger
  3. O-rings (replace and grease)
  4. External Torx screws (E10), M6 x 20
scientia non olet · About LEMON Manuals