LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (10 - Engine - Crankcase, Suspension -- CARRERA (997)) >> WM 103619 Removing And Installing Control Unit For Active Engine Mounting (PADM) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear side trim panel at the left. → 707519 REMOVING AND INSTALLING REAR SIDE TRIM PANEL - section on "Installing".
  2. If the control unit for the active engine mounting was replaced, the correct vehicle version must be coded.

    → 103655 REPLACING CONTROL UNIT FOR ACTIVE ENGINE MOUNTING .

scientia non olet · About LEMON Manuals