LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (10 - Engine - Crankcase, Suspension -- CARRERA (997)) >> WM 103619 Removing And Installing Control Unit For Active Engine Mounting (PADM) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch off ignition and remove ignition key from the ignition lock.
  2. Remove rear side trim panel at the left. → 707519 REMOVING AND INSTALLING REAR SIDE TRIM PANEL - section on "Removing".
scientia non olet · About LEMON Manuals