LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (10 - Engine - Crankcase, Suspension -- CARRERA (997)) >> WM 100137 Disassembling And Assembling Engine (Gt3) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the flywheel.

    → 136019 REMOVING AND INSTALLING FLYWHEEL .

    → 136019 REMOVING AND INSTALLING SINGLE-MASS FLYWHEEL .

  2. Fit the clutch.

    → 305019 REMOVING AND INSTALLING CLUTCH .

  3. Remove engine from assembly support using an engine lift and set it down on the Master Gear unit lifting platform WE 1206  . Get another person to help you do this.
  4. Screw off screw sleeves for the engine support on the engine/transmission flange and remove support.
    Fig 1: Supporting Engine Adapter (9667)
    G09815943Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Mount the transmission.

    → 343527 REMOVING AND MOUNTING TRANSMISSION .

  6. Install the engine.

    → 100119 REMOVING AND INSTALLING ENGINE .

scientia non olet · About LEMON Manuals