Installing Adjustment Fitting (Seat Belt Height Adjuster)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Belt Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Run adjustment fitting -2- down into the B-pillar -direction of arrow- and tighten the fastening screw -1- . Tightening torque → Tightening torque: 17 ftlb.

Fig 2: Adjusting B-Pillar Fastening Screw
Courtesy of PORSCHE CARS NORTH AMERICA, INC.