LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (70 - Linings, Insulation -- CARRERA (997)) >> WM 708619 Removing And Installing Trim Panel For Sliding/Lifting Roof (TARGA 4 & TARGA 4S) >> Removing Trim Panel For Sliding/Lifting Roof

Removing Trim Panel For Sliding/Lifting Roof

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Trim Panel For Sliding/Lifting Roof
G09833710Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Carefully unclip trim panel -1-  in a downward direction.
    Fig 2: Removing Trim Panel
    G09833711Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Check fastening clamps and replace them if necessary.