Installing Cover Plate For Exhaust Manifold

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Information

Specifications for wrench sizes (a/f specifications) for screw heads are described as follows:

Torx screws: (E..) for external Torx , (T..) for internal Torx .
Hexagon-head bolts (internal and external hexagon): Wrench size (a/f)

Position cover plate holder -1- on the cover plate (lower part) and secure with four external Torx screws (E10, M6 x 12) -2- .

Fig 1: Identifying Cover Plate And Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1.1. Tighten the screws.
→ Tightening torque: 10 Nm (7.5 ftlb.)