LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (10 - Engine - Crankcase, Suspension -- 987-BOXSTER-CAYMAN) >> WM 103219 Removing And Installing Engine Carrier (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition, CAYMAN R) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place protective covers in passenger compartment.
  2. Move seats all the way forward.
  3. Remove rear wall cover.

    → 555919 REMOVING AND INSTALLING REAR WALL COVER .

  4. Remove rear and center underbody covers.

    → Removing cover for rear underbody .

    → Removing cover for center underbody .

  5. Drain coolant. Open cap in service tray.

    → Draining Coolant .

  6. Remove two coolant hoses (supply and return line) -3-  .
    1. 6.1. Open plastic holder -1-  and unclip spring clamps -2-  . Pull Henn couplings out of the coolant pipes.
    2. 6.2. Open one spring band clamp and pull off hose.
      Fig 1: Identifying Coolant Hoses
      G09585088Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals