Technical Values
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Drive plate to crankshaft flange | M10 x 1 x 25 (12.9) | Initial tightening | 25 Nm (19 ftlb.) | ||
| Drive plate to crankshaft flange | M10 x 1 x 25 (12.9) | Torque angle | 120° | ||
| Flywheel to crankshaft flange | M10 x 1 x 50 (12.9) | Initial tightening | 25 Nm (19 ftlb.) | ||
| Flywheel to crankshaft flange | M10 x 1 x 50 (12.9) | Torque angle | 120° | ||
| Clutch pressure plate to flywheel | Replace M8 screws and tighten crosswise in several stages | Tightening torque | 23 Nm (17 ftlb.) |